1.2 acres Pet Dog fence Electric Shock Vibration Sound with Dog Remote Control for small to big dogs training collar Fencing System
Transmitter main function:
1. Proportional Pulse Stimulation: The closer your dog gets to the borderline, the greater the shock intensity.
2. Increasing pitch stimulus: First of all, a warning sound will be issued. If your dog continues to be close to the boundary line, it will send an electric shock.
3. Variable range control: Lets you better control the signal range.
4. Audible and visible wire damage indicator-When your buried wire is damaged, a loud warning sound will accompany the flash.
5. Speed Detector: The faster your dog moves, the faster the intensity level it emits will increase.
6. Built-in lightning protection device: protect the converter when lightning strike causes high voltage current.
7, adjustable signal range, the trigger distance between the receiver and the border can be adjusted 1-5 meters.
8. Sound and visual indicator of disconnection: If the buried cable is disconnected, a loud alarm sounds and flashes.
9. Multi-collar operation: it can be added to all the animals you have. There is no animal control quantity system.
10. The range reaches 5000 square meters (over 1.2 acres).
Receiver function operation:
1. Press the power switch once, power on and the red light flashes, and the receiver is automatically in Beeps+vibration+shock mode.
2. Press the power switch once more, the green light flashes, and the fence will automatically enter the Beeps+vibration mode.
3. Press the power switch again to turn off the host.
Remote control main function:
1. Trigger collar vibration, electric shock, sound function.
2. 0-99 Level adjustable collar vibration and shock intensity (only changed in remote control mode, the maximum intensity is still maintained for transmitter trigger).
3. There are 6 channels, and up to 6 receivers can be connected at the same time.
4.The maximum remote control distance is 500 meters
5. Free sync receiver to any channel. (After turning on the receiver, press the receiver power button for 3-5 seconds and wait for the green light to flash continuously. The receiver enters the waiting synchronization mode, then select the channel you need on the remote control, and press the remote control vibration button to complete the synchronization)
Warning:For best results, follow these important rules.
1. Low battery may cause intermittent operation. Please don't when you feel the battery is low use.
2. Adapt your dog to the collar before you start training. You should get your dog to accept the item circle and treat her as part of life.
3. Do not leave the collar receiver on your pet for more than 12 hours each day.
4. When the collar is on your dog, don't set the program randomly.
5. The electronic dog is only suitable for use under the supervision of a dog owner.
6. Keep away from children.
7. Please read all instructions before using this product.
Package Contents:
1 * indoor wall transmitter.
1 * power plug.(use for dog remote)
1 * Adjustable Collar Receiver.
1 * USB rechargeable cable+plug(use for dog collar)
1 * remote control transmitter.
1 * 300m long border power cord.(cable 1.0mm)
2 * additional metal contacts.
20 * training mark.
1 * tester.
3 * spiral nails.
1 * user manual.
1 * test light.
TPU changed to Upgraded strap: nylon
Vietnamese
HongKong
English
Hindi
Turkish
Português
Russian
Espanol
Korean
Arabic
French
German
